Use and Care Manual

X7502341200 25

PE-2620 MAINTENANCE

ENGLISH

Before edging, be sure to read

and understand the entire

Operator's Manual to avoid

serious injury.

7. When starting to edge, run the

engine at full throttle, and lower

the blade gently into the

ground, being careful not to hit

the concrete with the blade.

8. Don't force the blade. Move only

as quickly as the blade will

allow.

The complete unit, specifically

the drive shaft assembly and

muffler exhaust area may

become very hot during use.

Avoid contact during and

immediately after operation,

otherwise serious personal

injury may result.

MAINTENANCE

Moving parts can amputate fingers or cause severe injuries. Keep

hands, clothing and loose objects away from all openings. Always

stop engine, disconnect spark plug, and make sure all moving

parts have come to a complete stop before removing obstructions,

clearing debris, or servicing unit. Allow unit to cool before

performing service. Wear gloves to protect hands from sharp

edges and hot surfaces.