Use and Care Manual

MAINTENANCE PE-2620
30 X7502341200
© 1/2016 ECHO Inc.
1. Remove spark plug lead.
2. Remove muffler cover (A).
3. Remove engine cover (B).
DO NOT use a metal scraper to
remove dirt from the cylinder fins.
4. Use brush to remove dirt from the
cylinder fins.
5. Remove grass and leaves from the
grid between the recoil starter and
fuel tank.
6. Assemble components in reverse
order.
Exhaust System
Spark Arrestor Screen
Level 2.
1. Remove muffler cover (B).
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering
cylinder.
3. Remove spark arrestor screen
cover (C), gasket (E), and screen
(F), from muffler body.
4. Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
5. Replace screen if it is cracked,
plugged, or has holes burned
through.
6. Assemble components in reverse
order.
Parts Required: Spark Arrestor Screen, Gasket
A
B
F
C
E