Use and Care Manual

MAINTENANCE PE-2620/S

28 X7502350201

Note: Federal EPA regulations require all model year 2012 and later

gasoline powered engines produced for sale in the United

States to be equipped with a special low permeation fuel

supply hose between the carburetor and fuel tank. When

servicing model year 2012 and later equipment, only fuel

supply hoses certified by EPA can be used to replace the

original equipment supply hose. Fines up to $37,500 may be

enforced for using an un-certified replacement part.

Spark Plug

Level 2.

Parts Required:Tune Up Kit.

Use only NGK CMR7H spark plug otherwise severe engine damage

may occur.

1. Remove spark plug and check

for fouling, worn and rounded

center electrode.

2. Clean the plug or replace with a

new one. DO NOT sand blast to

clean. Remaining sand will

damage engine.

3. Adjust spark plug gap by

bending outer electrode.

4. Tighten spark plug to 102-153 kgf•cm (89-133 in•lbf).

0.65 mm (0.026 in.)