Use and Care Manual

SHC-2620 / S MAINTENANCE
X7502342003 27
© 07/19 ECHO Incorporated
Maintenance Intervals
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and
your experience will determine the frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
1 Apply lithium based grease every 25 hours of use.
2 Inspect blade and clean and sharpen as needed. Lubricate blades
periodically during use.
3 Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
COMPONENT/SYSTEM
MAINTENANCE
PROCEDURE
REQ’D
SKILL
LEVEL
Daily or Before Use
Air Filter Inspect/Clean * 1
Choke Shutter Inspect/Clean 1
Fuel System Inspect
3
1
Cooling System Inspect/Clean 2
Recoil Starter Rope Inspect/Clean * 1
Screws/Nuts/Bolts Inspect/Tighten/Replace * 1
Blades Inspect/Clean
2
1
Every Refuel
Fuel System Inspect
3
1
3 Months
Air Filter Replace * 1
Fuel Filter Inspect * 1
Fuel Cap Gasket Inspect * 1
Spark Plug Inspect/Clean/Replace * 1
Muffler Spark Arrestor Inspect/Clean/Replace * 2
Cylinder Exhaust Port Inspect/Clean/De-carbon 2
Gear Housing
Grease
1
2
Yearly
Fuel Filter Inspect/Replace * 1
Fuel Cap Gasket Replace * 1