Use and Care Manual

SAFETY SRM-225

12 X7732273803

Keep A Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on ladders.

Do not over reach.

Avoid Hot Surfaces

• Keep exhaust area clear of flammable debris. Avoid

contact during and immediately after operation.

Equipment

Use only approved attachments. Serious injury may result from

the use of a non-approved attachment combination. ECHO INC.

will not be responsible for the failure of cutting devices,

attachments or accessories which have not been tested and

approved by ECHO INC. Read and comply with all safety

instructions.

◆ Check unit for loose or missing nuts, bolts, and screws.

Tighten or replace as needed.

◆ Inspect shield for damage and ensure that shield is

properly installed, and that the cut-off knife is securely in

place. Replace if either is damaged or missing.

◆ Check that the cutting attachment is firmly attached and in

safe operating condition.

◆ Assure that throttle trigger, throttle trigger lockout, and

stop switch all work properly.

◆ Check that handle and harness (if included) are adjusted

for safe, comfortable operation. See Assembly Section for

proper adjustment.

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

◆ ALWAYS stop engine, disconnect spark plug, and make

sure all moving parts have come to a complete stop before

assembling unit, removing obstructions, clearing debris, or

servicing unit.

◆ Do not connect spark plug lead to spark plug unitl unit is

ready for use.