Use and Care Manual

SRM-225 MAINTENANCE

X7732273803 39

1. Check idle speed and reset if

necessary. If a tachometer is

available, idle speed screw (A)

should be set to the

specifications found on

“Specifications” page of this

manual. Turn idle screw (A)

clockwise to increase idle

speed; counterclockwise to

decrease idle speed.

When carburetor adjustment is completed, the cutting

attachment should not move at idle, otherwise serious personal

injury may result.

Lubrication

Level 1.

Parts Required: Lithium Based Grease.

Gear Case

Gear cases without grease plug (A) do not require lubrication.

1. Clean all loose debris from gear

case.

2. Remove plug (A) and check level

of grease.

3. Add grease if necessary. DO

NOT over-fill.