Use and Care Manual

SRM-225I OPERATION

X7732274902 25

Starting Cold Engine

The attachment will operate immediately when the engine

starts, and could result in possible serious injury. Keep

movable parts of the attachment away from objects that could

become entangled or thrown, and surfaces that could cause

loss of control.

1. Stop Switch

Move stop switch (A) away from

the STOP position.

2. Choke

Move choke lever (B) to COLD

START position ( ).

3. Purge Bulb

Pump purge bulb (C) until fuel is

visible and flows freely in the

clear fuel tank return line. Pump

bulb an additional 4 or 5 times.

Note: Energy is stored in the starter spring each time the handle/

rope is pulled. Generally, two to six pulls, using light pulling

force, will store enough energy to engage the starter and spin

the engine. Do not pull the rope out to end stop.