Use and Care Manual

SRM-225I MAINTENANCE

X7732274902 35

Overheating and engine seizure can

occur when:

• Air intakes are blocked,

preventing cooling air from

reaching the cylinder.

• Dust and grass build up on the

outside of the cylinder. This build

up insulates the engine and

prevents the heat from leaving.

Removal of cooling passage

blockages or cleaning of cooling fins is considered “Normal Maintenance.”

Any failure attributed to lack of maintenance is not warranted.

1. Remove spark plug lead.

2. Remove air cleaner cover (A).

3. Remove engine cover (B).

DO NOT use a metal scraper to remove dirt from the cylinder fins.

4. Use a brush to remove dirt from

the cylinder fins.

5. Remove ignition wires from clip

for cleaning.