Use and Care Manual

SRM-225I MAINTENANCE

X7732274902 37

1. Remove spark plug lead from

spark plug, and remove engine

cover.

2. Place piston at top dead center.

Remove muffler (A) and heat

shield (B).

3. Use a wood or plastic scraping

tool to clean deposits from

cylinder exhaust port (C).

Never use a metal tool to scrape carbon from the exhaust port. Do

not scratch the cylinder or piston when cleaning the exhaust port. Do

not allow carbon particles to enter the cylinder.

4. Inspect heat shield, and replace if damaged.

5. Install heat shield and muffler.

6. Tighten muffler mounting bolts (or nuts) to 90-110 kgf•cm (80-95

in•lbf).

7. Install engine cover and attach spark plug lead.

8. Start engine, and warm to operating temperature.

9. Stop engine, and re-tighten mounting bolts (or nuts) to specifications.

Carburetor Adjustment

Level 2.