Use and Care Manual

SRM-225I MAINTENANCE

X7732274902 39

Lubrication

Level 1.

Parts Required: Lithium Based Grease.

Gear Housing

1. Clean all loose debris from gear case.

2. Remove plug (A) and check

level of grease.

3. Add grease if necessary. DO

NOT over-fill.

Drive Shaft

1. Loosen screw (B) and remove

locating screw (C). Pull gear

case and shield from drive shaft

housing.

2. Pull flexible cable from the drive

shaft housing, wipe clean and

re-coat with 15 ml (0.5 oz.) of

grease.

3. Slide the flexible cable back in the drive housing. DO NOT get dirt on

the flex cable.

4. Install the gear housing and shield assembly.

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed

head disassembly is not

necessary. However, if circumstances require disassembly,

follow these instructions.