Use and Care Manual

OPERATION SRM-2620

18 X7502341701

◆ Always be alert for changes in operation of unit.

◆ Always shut engine off before transporting unit to new

location.

Operation With Blades

Metal blades are very sharp and can cause severe

injuries, even if engine is off and blades are not

moving. Avoid contact with blades. Wear gloves to

protect hands.

Blade use demands specific brush cutter configuration.

Operation without specified shield, barrier bar or U-handle, and

harness can result in serious personal injury. Follow installation

instructions.

*ANSI standards require brush cutters be equipped with a barrier bar or

restrictive harness. U-Handle ensures a higher safety factor.

Do Not install blades on GT (Curved Shaft) model trimmers.

• Arbor diameter of upper blade plate must match arbor diameter of blades.

Pro Maxi-Cut

Grass/Weed

Blade

Tri-Cut Grass/

Weed Blade

Metal Grass /

Weed Blade

Metal Brush /

Clearing

Blades

Support

Handle, with or

without Barrier

Bar

U-Handle or Support Handle with

Barrier Bar

U-handle*

Shield with

cutoff knife

Shield without cutoff knife

Harness

Upper Plate &

Flat Washer

Upper/Lower Blade Plates

Hex Nut

New Cotter Pin