Use and Care Manual

MAINTENANCE SRM-2620

36 X7502341701

Lubrication

Level 1.

Gear Housing

1. Clean all loose debris from

gear case.

2. Remove plug (A) and check

level of grease.

3. Add grease if necessary. DO

NOT over-fill.

Drive Shaft

1. Loosen screw (B) and

remove locating screw (C).

Pull gear case and shield

from drive shaft housing.

2. Pull flexible cable from the drive shaft housing, wipe clean and re-coat

with a thin coating [15 ml (1/2 oz.)] of grease.

3. Slide the flexible cable back in the drive housing. DO NOT get dirt on

the flex cable.

4. Install the gear housing and shield assembly.

Parts Required: Lithium Based Grease.