Use and Care Manual

MAINTENANCE SRM-266

30 X7502028001

Fuel is VERY flammable. Use extreme care when mixing, storing or

handling, or serious personal injury may result.

1. Use a clean rag to remove loose

dirt from around fuel cap and

empty fuel tank.

2. Pull the fuel filter from the fuel

tank.

3. Remove the filter from the line

and install the new filter.

Note: Federal EPA regulations

require all model year

2012 and later gasoline

powered engines

produced for sale in the

United States to be

equipped with a special low permeation fuel supply hose

between the carburetor and fuel tank. When servicing model

year 2012 and later equipment, only fuel supply hoses certified

by EPA can be used to replace the original equipment supply

hose. Fines up to $37,500 may be enforced for using an un-

certified replacement part.

Spark Plug

Level 2

Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise

severe engine damage may occur.

1. Remove spark plug and check for

fouling, worn and rounded center

electrode.

2. Clean the plug or replace with a new

one. DO NOT sand blast to clean.

Remaining sand will damage engine.

Parts Required: Tune-Up Kit

0.65 mm (0.026 in.)