Use and Care Manual

MAINTENANCE SRM-266
32 X7502028001
© 6/2016 ECHO Inc.
DO NOT use a metal scraper to remove dirt from the cylinder fins.
5. Use brush to remove dirt from
the cylinder fins.
6. Remove grass and leaves from
the grid between the recoil
starter and fuel tank.
7. Assemble components in
reverse order.
Exhaust System
Spark Arrestor Screen
Level 2
1. Remove spark plug lead.
2. Remove muffler cover (A).
3. Place piston at Top Dead Center
(TDC) to prevent carbon/dirt
from entering cylinder.
4. Remove spark arrestor screen
(D), gasket (C) and exhaust
guide (B) from muffler body.
5. Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposits, be careful not to
damage the catalytic element inside muffler.
6. Replace screen if it is cracked, plugged, or has holes burned through.
7. Assemble components in reverse order.
Exhaust Port Cleaning
Level 2
Parts Required: Spark Arrestor Screen, Gasket
Parts Required: As needed; Heat Shield
C
B
D
A