Use and Care Manual

OPERATION SRM-3020U

30 X7502350201

Starting Cold Engine

The attachment will operate immediately when the engine

starts, and could result in possible serious injury. Keep

movable parts of the attachment away from objects that could

become entangled or thrown, and surfaces that could cause

loss of control.

1. Stop Switch

Move stop switch button (A)

forward, away from the STOP

position.

2. Choke

Move choke lever (B) to COLD

START position.

3. Purge Bulb

Pump purge bulb (C) until fuel is

visible and flows freely in the

clear fuel tank return line. Pump

bulb an additional four or five

times.

Note: Lightly place knee on

drive shaft to stabilize unit

during starting. Do not

apply excessive

downward force or

damage to unit can occur.

4. Recoil Starter