Trimmer User Manual

NOTE

The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE and should

not be gripped when using or carrying the unit.

operaTIon wITh blades

Preparing the Trimmer/Brush Cutter for Blade Use

WARNING

Blade use DEMANDS specic Brush Cutter conguration. Operation without specied shield, barrier bar or U-

handle, and harness can result in serious personal injury. Follow installation instructions included in optional kits.

TO USE

THESE BLADES

Pro Maxi-Cut

Grass/Weed

Blade

Rigid Plastic

Tri-Cut

Grass/Weed Blade

Metal Blade

Loop Handle, w/or

w/o Barrier Bar

U-Handle or Loop Handle

w/Barrier Bar

U-Handle or Loop Handle

w/Barrier Bar

Plastic Shield Plastic Shield Metal Shield

Harness Harness Harness

Upper Plate &

Flat Washer

Upper Plate

& Glide Cup

Upper/Lower

Blade Plates

Hex Nut Hex Nut Hex Nut

You

must

install

these

parts!

New Cotter Pin New Cotter Pin New Cotter Pin

• WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS

• Arbor diameter of Upper Blade Plate must match arbor diameter of blades.

• New cotter pin required each time blade is installed.

• Brush Cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness

blade seT-up GuIde