#YourGearUpgraded Triple Screen Monitor Stand for Gaming INSTRUCTION MANUAL Model Echo-gm3c
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO quest. SAVE These INSTRUCTIONS. Before You EmBark on your Quest... just read it so you don’t get pwned! Please read through these instructions completely and check your monitors' owner manual to see if there are any special requirements for mounting your monitor.
Size up Your Mounting Surface 0.8 in. - 2.6 in. DESKTOP THICKNESS (20.32 mm -66.04 mm) ? UUUUHHH ?!? Unsure? Contact The Echogear Pros: 1-855-428-2490 www.echogear.com "No snapinr pics for twitte r til you done!" Yo Hands "Yo defi u will nee nitely han d two ds this! for " BOnus Loot! 2 FREE Inside Every Box Hex Keys 7/32 A 5/32 "Ph the il is bos s" Phillips Screwdriver B A " K.A "A.
ONE MORE THING ... Echogear Satisfaction Guarantee: We’re driven to give DIYers an awesome install experience. We stand behind everything we make because you deserve the best entertainment experience without sacrificing quality and spending your whole paycheck. Guess what? We’ll help you through the entire process, too. Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S.
Here's your Loadout WARNINGS: DON'T ALLOW CHILDREN TO FEED ON CONTENTS AND NEVER USE DAMAGED GOODS! ►► This product contains small items that are a choking hazard if swallowed. ►► Before you start assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Gear FOR Level 3 6 12 Screws M4 X 12mm 7 12 Screws M4 X 30mm 12 Spacers 5mm 9 12 Spacers 22mm 1 Cable Cover 11 8 10
Level 1 Lock It Down! Clamp Post to Desk STAGE 1: Plaster Soft Bumpers + 6 on Desk Clamp 1 2 7
STAGE 2: Screw Post to Clamp Tightly 3 A 1 4 8
STAGE 3: Secure Clamp To Surface 1 9
Level 2 TRIPLE THREAT! Attach Mounting bar to Post STAGE 1: Loosen Center Screws and Slide Bar Over Post a b 5 5 B 3 TIP: Loosen screws to where the bracket is loose enough to avoid scratching post.
STAGE 2: Tighten Screws To Secure Mounting Bar to Post B 5 TIP: You should adjust height and rotation of bar before monitors are attached. Otherwise it's a two person job. WARNING: MOUNTING BAR MUST REMAIN OVER DESK SURFACE.
STAGE 3: Insert the End Cap into Post 6 3 12
Level 3 Hang em! Attach 3 Monitors to mounting bar STAGE 1: Determine Screw Length and Spacer Size NOT NEEDED NEEDED FOR Flat Monitor Flat Monitor Select Spacers Cables Round Monitor + or (if needed) Short Screw Select Screws Inset Holes Long Screw 7 8 or Bracket Bracket 9/10 Spacer 13
STAGE 2: Partially Insert Top Screws in Center Monitor 7 OR 8 9/10 14
STAGE 3: Hang Monitor by Top Screws onto Center Bracket 5 15
STAGE 4: Insert Bottom Screws and Tighen All for Screws 7 OR 8 9/10 wn en do "Batt tches" a the h 16
STAGE 5: Repeat Level 3 Twice to Complete Mission 1 2 TIP: You can add spacers to the outside monitors to change the angle of the display.
"U R A BOSS" STAGE 7: Plug All Cables into Monitors and Disguise with Cover pics me o s t os on.
Bonus Level! Adjustments /Modifiers Vertical Position - Adjust Mounting Bar Up and Down b B a c TIP: Loosen screws to where the bracket is loose enough to avoid scratching post. TIP: You should adjust height and rotation of bar before monitors are attached. Otherwise it's a two person job.
Rotate - Adjust Position of Mounting Bar WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. Top View B Desk WARNING: DO NOT ATTEMPT TO ROTATE ENTIRE BAR WITHOUT LOOSENING SCREWS ON BACK OF MOUNTING BAR.
Tilt & Level IF MONITORS DO NOT MOVE WITH EASE OR LOCK IN PLACE: Adjust the tension of the bracket by rotating the front adjustment knob F either counter-clockwise (loosen) or clockwise (tighten) F . WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. F on ... "Come ith me..." w level WARNING: DO NOT ATTEMPT TO ROTATE ENTIRE BAR WITHOUT LOOSENING SCREWS ON BACK OF MOUNTING BAR.
Horizontal Position - Adjust Monitors Left or Right WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. TO SPACE MONITORS EVENLY: a Hold monitor with one hand and rotate the rear adjustment knob counter-clockwise (loosen) R . b Slide monitor to desired horizontal position. c Tighten to secure position by rotating the rear adjustment knob clockwise R . t ef " "L sey o Lo a b ty igh ty" R " gh Ti c Repeat as needed.
How to remove Mount from Monitor and Surface 1. Remove Cables / Monitors 2. Remove Bar 3.
“Wanna show off your skillzz? Share a picture of your completed mount with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Confuzzled? Contact the ECHOGEAR Pros: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com ECHOGEAR.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.
