#YourGearUpgraded Full Motion TV Wall Mount Model EGLF1 INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS Yea, the boring stuff ... but read it, so you don’t jack things up! Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Verify Your Wall Construction CAUTION: ? wood studs? DO NOT install into drywall alone Contact The Echogear Pros at 1-855-428-2490 or www.echogear.com Perfect! to ou WANT ... unless y r TV fall and u o watch y the floor. crash onto UUUUHHH ?!? Unsure? Good to Go Grab Your Tools Toy Surprise FREE Inside Every Box Stud Finder Awl Tape Measure k bac e it when v i "G Phil h" to finis you Phillips Screwdriver Pencil 7/32 in. (5.5 mm) for wood Electric Drill Drill Bit Level 1/2 in.
One More Thing ... Echogear Satisfaction Guarantee: We’re driven to give DIYers an awesome install experience. We stand behind everything we make because you deserve the best entertainment experience without sacrificing quality and spending your whole paycheck. Guess what? We’ll help you through the entire process, too. Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S.
What’s in the Box WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included in this kit will be used. STUFF FOR STEP 1 01 TV Screws (qty. 4 each) [Only one size fits your TV] 02 Washers (qty.
STUFF FOR STEP 2 End Cap Extension Brackets Extension Screws M6 x 12mm 08 11 qty.2 09 End Cap & Bracket Clip Screws qty.2 10 Wall Plate/Arm 05 qty.2 M5 x 12mm 12 qty.4 of 8 qty. 1 Washer Lag Screw (For Lag Screw) STUFF FOR STEP 3 Bracket Clip 5/16 x 2¾ in. 06 qty. 4 6 qty.4 5/16 in. 07 qty.4 End Cap & Bracket Clip Screws 13 qty.2 M5 x 12mm 12 qty.
STEP 1 Attach the TV BRACKETS TO YOUR TV STEP 1.1 Select TV Screws a Only one screw size fits your TV. M4 M6 M8 r d uses fo screws: the extra "Suggeste s, me piece board ga , l jewelry industria , rn holders sweet co n e ts – strum musical in cas or like mara n' sticks, 'monsoo Select Spacers (if needed) STEP 1.
STEP 1.3 Secure the TV Brackets to Your TV 04 a No Spacer 01 02 04 CAUTION: Ensure both TV brackets 04 are EQUALLY CENTERED on your TV AND securely fastened in place.
STEP 2 I nstall the Wall Plate CAUTION: Avoid potential personal injuries and property damage! Min. Wood Stud Depth: nominal 4 in. (102 mm) actual 3 ½ in. (89 mm) STEP 2.1 Find a Stud ay X-Recs Sp ld so tely ara p se Min. Wood Stud Width: nominal 2 in. (51 mm) actual 1 ½ in. (38 mm) Min. Wood Stud Spacing: 16 in. (406 mm) Max. Drywall: 5/8 in. (16 mm) Drywall covering the wall must not exceed 5/8 in. (16 mm). Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in.
Mark the Location STEP 2.2 STEP 2.3 Drill Holes 2¾ in. (6.9 cm) on ... "Come h me" it level w 05 10 7/32 in. Bit (5.
STEP 2.4 Secure Wall Plate STEP 2.5 Assemble Extensions 12 08 09 4X 05 12 09 07 06 08 11 HK 2X 05 CAUTION: Avoid potential personal injury or property damage! All four lag screws 06 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly.
STEP 3 STEP 3.1 Hang Your TV Hang Your TV HEAVY! You may need 04 04 assistance with this step. rs that iend of you "Ask that fr ssFit" ro n about C yammers o 04 04 05 05 08 IMPORTANT: TV brackets 04 MUST be centered span the faceplate of arm 05 . AND 12 E ...
STEP 3.2 Secure Your TV 05 04 13 08 09 12 04 CAUTION: Avoid potential personal injury or property damage! Bracket clips 13 and screws 12 MUST be installed to secure your TV with brackets 04 to wall plate/arm 05 .
ADJUSTMENTS Tilt TO ADJUST THE TILT TENSION, first rotate (tighten or loosen) the tilt lever T as far as you can, then: a Pull and hold the lever T outward, b Rotate the lever T in the opposite direction, c Release the lever T back into position, d Rotate the lever T to tighten or loosen. Repeat as needed. LOOSEN: to adjust the TV tilt position. TIGHTEN: to set the TV in place at your desired tilt angle.
Level REMOVE YOUR TV 1. Loosen the two screws L on the rear of arm plate 05 , using the hex key. HEAVY! You may need assistance with this step. 2. Level your TV. "Don't be a 3. Retighten screws L to secure in place.
“Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Confuzzled? Contact the ECHOGEAR Pros: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com ECHOGEAR.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.