#YourGearUpgraded Full Motion TV Wall Mount Model EGLF2 INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE These INSTRUCTIONS Yea, the boring stuff ... but read it, so you don’t jack things up! Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Verify Your Wall Construction wood studs (with Drywall)? CAUTION: DO NOT install into drywall alone Solid concrete or concrete block? Contact The Echogear Pros at 1-855-428-2490 or www.echogear.com Kit# CMK1 Required Perfect! Good to Go ? UUUUHHH ?!? Unsure? (Not Included) Grab Your Tools ack it b hen e v "Gi Phil w h" to finis you Tape Measure Pencil Tape Wood Stud Wall Installation Phillips Screwdriver 3/8 in. (10 mm) [1/4 in.
One More Thing ... Echogear Satisfaction Guarantee: We’re driven to give DIYers an awesome install experience. We stand behind everything we make because you deserve the best entertainment experience without sacrificing quality and spending your whole paycheck. Guess what? We’ll help you through the entire process, too. Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S.
What’s in the Box WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included in this kit will be used.
STUFF FOR STEP 2 STUFF FOR STEP 3 5/16 x 2¾ in. Lag Screw 5/16 x 2¾ in. 14 x4 Washer (For Lag Screw) Drill Hole Template 12 x1 5/16 in. 15 x4 5/16 in.
STEP 1 Attach the TV BRACKETS TO YOUR TV STEP 1.1 Select TV Screws Only one screw size fits your TV. ces, me pie a g d r a , ws: bo aracas ade m ra scre t m x e e m e o ,h r th ." olders ses fo ries) .. corn h sted u t e e count g e t g s w u s o , "S y m lr t e (no rial jew rency indust rs, cur e ff u t gs stockin M6 STEP 1.
STEP 1.3 Secure the TV Brackets 01 a 02 b 01 Screw and washer 8 09 screw, washer and Spacer(s) 02 10 11 CAUTION: Ensure the TV brackets 01 are EQUALLY CENTERED on your TV AND securely fastened in place.
STEP 2 I nstall the Wall Plate /Arm For For follow STEP 2A on PAGE 10 follow STEP 2B on PAGE 12 WOOD STUD INSTALLATIONS, Min. Wood Stud Depth: nominal 4 in. (102 mm) actual 3 1/2 in. (89 mm) Min. Wood Stud Width: nominal 2 in. (51 mm) actual 1 1/2 in. (38 mm) Min. Wood Stud Spacing: 16 in. (406 mm) CONCRETE INSTALLATIONS, Min. 8 in. (203 mm) Min. 8 in. (203 mm) Min. 16 in. (406 mm) Min. 8 in. (203 mm) Max. 5/8 in.
STEP 2A STEP 2A.1 (For Wood Stud) Find a Stud Install the Wall Plate /Arm STEP 2A.2 Align the Template ay X-Recs Sp ld so tely ara p se on ... "Come h me" it level w TIP: Do this in the location you are installing wall plate 13 , so the holes will be covered. Use a stud finder ... ... and/or verify the edges with an awl or a small drill bit.
STEP 2A.3 Drill Holes STEP 2A.4 Secure Wall Plate 2¾ in. (6.9 cm) 14 7/32 in. Bit (5.5 mm) 12 15 13 CAUTION: Avoid potential personal injury or property damage! All four lag screws 14 MUST BE firmly tightened to prevent unwanted Go to STEP 3 movement of the wall plate assembly.
STEP 2B STEP 2B.1 (For CONCRETE) Align the Template Install the Wall Plate /Arm STEP 2B.2 Drill Holes 3 in. (7.6 cm) Min 24 in . hole S pa . (610 mm) cing: 3/8 in. Bit (10 mm) on ... "Come h me" it level w 12 12 12 IMPORTANT: Never drill into the mortar between blocks.
STEP 2B.3 Insert Concrete Anchors STEP 2B.4 14 Secure Wall Plate 15 13 C1 12 For concrete anchors C1 , contact The Echogear Pros at 1-855-428-2490 CAUTION: Avoid potential personal injury or property damage! All four lag screws 14 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly.
STEP 3 STEP 3.1 Hang Your TV Install End Caps STEP 3.2 Prepare Your TV 16 01 S 17 16 17 01 Save screws S for use in STEP 3.
STEP 3.3 Hang Your TV HEAVY! You may need assistance with this step. rs that iend of you "Ask that fr ssfit" o n about cr yammers o 01 01 13 01 01 13 13 IMPORTANT: TV brackets 01 MUST be centered AND span the faceplate of arm 13 . E ...
STEP 3.4 Secure Your TV 13 01 13 B S 01 CAUTION: Avoid potential personal injury or property damage! Bracket clips B and screws S MUST be installed to secure your TV with brackets 01 to wall plate/arm 13 .
ADJUSTMENTS Tilt 1. Loosen the tilt lever T . 3. Tighten tilt lever T to secure the TV in place at your desired tilt angle. NOTE: If needed, tighten screw T2 for additional tilt tensioning. Lefty Loosey T2 2. Adjust the TV tilt position.
Level 1. Loosen the two screws L on the rear of arm plate 13 , using the hex key. 2. Level your TV. 3. Retighten screws L to secure in place.
REMOVE YOUR TV Remove screws S and bracket clips B , then lift your TV up and off of wall plate/arm 13 . HEAVY! You may need Lefty Loosey assistance with this step.
“Wanna show off your hard work? Share a picture of your completed project with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Confuzzled? Contact the ECHOGEAR Pros: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com ECHOGEAR.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.