Installation Manual

12
6
Go to STEP 3 on PAGE 15
CAUTION: Avoid potential personal injury or property damage! All lag screws
16
MUST BE firmly tightened to prevent unwanted movement
of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
NOTE: If needed, you can make small level adjustments to the
wall plate assembly
14
by loosening the bottom lag screw
16
and
shifting the wall plate assembly
14
until level. Tighten the bottom lag
screw
16
when adjustments are complete.
16
15
14
16
14