User`s manual

Front panel and rear panel illustration

Used to turn on/off the mains power supply.

LED DISPLAY: Used to display the time or channel number.

SENSOR：Receptor remote.

VOL-: To decrease the volume level.

VOL+: To increase the volume level.

CH-: TO change channels downward.

CH+: TO change channels upward.

OK: To confirm the choice with the highlighted menu item.

Menu: To enter the main menu. Press the button again to return to the previous menu.

USB：Support USB 2.0 PVR. MP3, JPG photo, playback.

SMARTCARD SLOT: Open the right-hand flap on the front panel to insert the smartcard here

Rear Panel

1. ANT IN：Connects to your external aerial.

2. LOOP OUT： RF loop through output to another receiver.

3. TV-SCAR：Digital video output.

4. AUDIO L/R：This two jacks (white/ red) output analog audio signal.

5. Video ：This jack outputs composite video signal. Standard definition only 480i and 576i resolution.

6. COAXIAL output：Phono socket for Digital audio output connects to TV or HiFi.

7. HDMI：Connects to the TV using an HDMI cable for HD viewing (760p & 1080i).

8. POWER SWITCH：To switch the set top box to on and off.

9. Power In：AC 100~240V, 50∼60Hz