Instructions for Use

7
Installation Guide
7
tel - 1-800-477-2267
email - [e-mail]
Illustrations are typical and may not match exact vehicle detail
6
Installation Guide
6
tel - 1-800-477-2267
email - [e-mail]
Illustrations are typical and may not match exact vehicle detail
Disassembly (continued)
EM-BUC-KIT-JW
Jeep Wrangler JK Backup Camera
EM-BUC-KIT-JW
Jeep Wrangler JK Backup Camera
Step 5
Remove the 10mm nut that fastens the rear trim panel into
place.
Step 4
Using a plastic trim tool remove the back side cover from
the base of the roll bar.
Step 6
Remove the (2x) T30 Torx bolts that fasten the rear trim panel
into place.
Step 8
Prepare the passenger side door sill for removal by removing
the two plastic fasteners.
Step 7
With all the nuts and bolts removed, pull the rear trim panel
towards the center of the vehicle to remove it.
Step 3
Fold up the rear passenger roll bar cover and pop up the
plastic seatbelt guide using a plastic trim tool. Slide it up the
seat belt so that it is out of the way.