MRC-HDDVR FULL SCREEN REAR VIEW MIRROR REPLACEMENT MONITOR WITH DVR AND BACKUP CAMERA KIT USER MANUAL 1080p FHD
Mirror Dash Camera 4X Vehicle-Specific Monitoer Mounting Adapters 1X Universal Adapter 2 Rear CameraC Micro Fuse Tap Adapter x2 ar Rear Window Bracket Video Cable License Plate Bracket GPS Antenna Wrench Power Cable email - support@aampglobal.com tel - 866-931-8021 email - support@aampglobal.
MRC-HDDVR Full Screen Rear View Mirror Replacement Monitor with DVR and Backup Camera Kit STEP 2: INSTALLATION GUIDE MIRROR INSTALLATION Monitor Overview REMOVE THE ORIGINAL MIRROR 1 Hold the base of the bracket STEP 1: GETTING STARTED Installing the Memory Card NOTE: Before removing the memory card, make sure the device is turned off. 2 Pull out away from the windshield to slide bracket off 3 Remove rear view mirror INSTALL YOUR NEW MIRROR NOTE: Different cars require different brackets.
STEP 3: HONDA / SUBARU (ADAPTER 3) MIRROR ADAPTERS (IF APPLICABLE) VOLKSWAGEN / AUDI (ADAPTER 1) (not needed with mirrors that have a protective case) ADAPTER 4 In some vehicles, the EchoMaster mirror will not fit in the standard bracket in the vehicle, and none of the adapters fit. In this case, glue Adapter 4 onto the windshield using UV glue. DODGE, CHRYSLER, JEEP, VOLVO (COMPACT), BMW (COMPACT) (ADAPTER 2) (not needed with mirrors that have a protective case) 6 email - support@aampglobal.
STEP 4: STEP 5: CAMERA INSTALLATION INSTALLATION WIRING There are two locations you can install your EchoMaster backup camera. We recommend that it is installed on your license plate, but it can also be installed on your back windshield if needed. MOUNTING THE CAMERA ON YOUR LICENSE PLATE 1. Remove license plate 2. Mount the camera to the top or bottom of your license plate 2.
STEP 6: NOTE: The Micro add-a-circuit fuse tap adapter is included in the package. MONITOR SETTINGS A: Connect the yellow wire (B+) to the fuse box (Please be sure the fuse tap adapter is connected to the other end) Turn ON/OFF the Monitor This wire needs to be connected to the fuse which is a constant power source. 1.Turn ON The monitor will automatically turn on when the vehicle turns on. It is not necessary to press the power button.
Menu Options 12 email - support@aampglobal.
Loop Recording Manual Emergency Recording Insert a memory card into the card slot, and automatic loop recording will begin after the vehicle turns on. The loop recording will be divided into several video clips; the recording will not stop between video clips. To activate manual emergency recording, tap ( ), the current recording will be locked as emergency recording and cannot be overwritten by loop recording.
Manually Display Park Assist Grid Lines Automatic Date and Time 1. Tap ( )> ( ) > General Settings > Time Zone 2. Select the appropriate time zone, then press “Yes” to confirm or press “No” to cancel the current selection 3.
Taking a Photo 1. Tap ( )> ( ) > General Settings > Time Zone 2. Select the desired type: Normal (Loop recording) /Emergency video (Emergency recording) /Photo. 3. Tap the desired file to playback. 4. During playback, you can: (1) While playing videos, tap to play the previous/next video; tap to play/pause the video; hold on a point along the track bar to move directly to a different location for the playback. (2) While viewing photos, tap to display the previous/next photo.
TROUBLE SHOOTING Crash Issue • Please format memory card regularly. • Replace with a new memory card (class 10 or higher). • If the solutions mentioned above do not help, please reset the dash cam. Blank Screen • Reset or restore default settings. Phone – 866-931-8021 Unable to turn on/off automatically E-Mail – support@aampglobal.com • Reset or restore default settings. GPS date / time are incorrect • Choose the correct time zone manually when using it in the first time.
Phone – 866-931-8021 E-Mail – support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.
