MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA size) User Manual
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Introduction Thank you for purchasing your EchoMaster automotive monitor. Your monitor displays a clear, high resolution image of the area surrounding your vehicle, meaning your maneuvring and vehicle awareness will be greatly improved. Please ensure you read and understand all aspects of this manual before fitting or using your EchoMaster monitor. Box Contents u Factory Style Rear-View Mirror u u u with 4.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Fitting Instructions Choose a mounting location that will not obscure the driver’s view. Also please ensure that the unit is not mounted in a location that will obstruct the operation of any airbags. 1. Remove OEM mirror and replace with supplied LCD mirror. 2. Run your wiring harness into the headliner and down the vehicles A-Pillar, making sure to avoid any factory airbags. Secure your wiring with zip-ties. 3.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Fitting Instructions - (continued) Attaching the camera to bracket NOTE: The triangular notch on the top of the camera indicates top of the camera Installation (Honda, Acura, Subaru, Scion) Remove original mirror Slide Factory mirror down, toward the bottom of the windsheild 4 email - support@aampglobal.com (US) tel - 1-800-477-2267 (US) email - technical.eu@aampglobal.com (Europe) Remove the mirror.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Adaptor Installation Installation (Volkswagen, Audi) Remove original mirror Slide Factory mirror down, toward the bottom of the windsheild Remove the mirror. email - support@aampglobal.com (US) tel - 1-800-477-2267 (US) email - technical.eu@aampglobal.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Installation (Volkswagen, Audi) Adaptor Installation 6 email - support@aampglobal.com (US) tel - 1-800-477-2267 (US) email - technical.eu@aampglobal.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Installation (Jeep, Dodge, Chrysler, RAM) Remove original mirror 1 2 Carefully pull top of the shroud toward the sides of the vehicle, on both sides. 3 Remove the top portion of the shroud. Carefully pull shroud down (away from windscreen) 4 Grasp mirror bracket and turn counter clockwise 5 Rotate mirror bracket counter clockwise, then pull away from windsheild email - support@aampglobal.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Operating Instructions 1. While using the Video 1 Input, you can press the Power button to turn the monitor ON/OFF 2. While using the Video 2 Input (Backup Camera), you can press the Power button for 1.5 seconds to turn the monitor ON/OFF, or use a short press to adjust the image brightness. 3. When the vehicle is shifted into reverse, it will supply power to the camera, which will provide an image to the mirror.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Wiring Diagram email - support@aampglobal.com (US) tel - 1-800-477-2267 (Florida) - 1-888-883-2760 (California) email - technical.eu@aampglobal.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Specifications Camera Sensor Type LEDs 1/3” CMOS 0 Illumination 0.1 LUX Viewing Angle 170 degrees Mirror Image YES Normal Image YES Water/Debris-Proof IP68 Parking Lines Audio Selectable NO Power Supply Current Working Temperature Dimensions (mm) 12V DC <50mA 25ºC - +65ºC D (41) x W (196) x H (35) System NTSC TV Lines 480 Resolution 10 email - support@aampglobal.
Installation Guide MRC-LP01CP Factory Mount Mirror Monitor with License Plate Camera (USA) Mirror Monitor Screen Size 4.3” Aspect Ratio 16:9 Power Supply 12VDC Resolution 480x272 Luminance 1000 Contrast 500:1 TV Format OSD Languages Auto English Video Inputs 2 Audio Inputs 0 Triggers 0 Current Draw 200-400mA Operating Temperature -20C - +60C Parking Guidelines No Connection Type RCA Dimensions (mm) 278 x 81 x 43 email - support@aampglobal.
15500 Lightwave Drive, Suite 202, Clearwater, Florida 33760 Woolmer Way, Bordon, Hampshire, United Kingdom email - support@aampglobal.com (US) tel - 1-800-477-2267 (Florida) - 1-888-883-2760 (California) email - technical.eu@aampglobal.com (Europe) Echomaster is a brand of AAMP Global. www.echomaster.
