Installation Guide

7
Installation Guide
6
Step 7
Route the reverse and turn signal wires to their respective locations according to the
table below. It may be necessary to extend the wires to reach the location.
2008
Turn Signal (Left) White / Light Green + TIPM on driver fender in front of
Battery, Black 10 pin plug, pin 1
Turn Signal (Right) White / Tan + TIPM on driver fender in front of
Battery, Black 10 pin plug, pin 2
Reverse Light White / Light Green + TIPM on driver fender in front of
Battery, Lt. Gray 12 pin plug, pin 11
2009 - 2012
Turn Signal (Left) White / Light Green + TIPM on driver fender in front of
Battery, Gray 16 pin plug, pin 12
Turn Signal (Right) White / Tan + TIPM on driver fender in front of
Battery, Gray 16 pin plug, pin 13
Reverse Light White / Red + TIPM on driver fender in front of
Battery, Brown 40 pin plug, pin 15
2013 - 2019
Turn Signal (Left) White / Light Green + BCM under driver dash, White 24 pin
plug, pin 14
Turn Signal (Right) White / Tan + BCM under driver dash, Black 24 pin
plug, pin 13
Reverse Light White / Tan + BCM under driver dash, White 48 pin
plug, pin 41
PCAM-CHMSL2-DR08
Replacement Third Brake Light Camera