User's Manual

Receiver to TV, VCR and Decoder with SCART Cables

DECODER

DECODER SCART

1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar AD-3000IP VIACCESS.

2. Connect the TV OUT socket of the EchoStar AD-3000IP VIACCESS to the RF IN of the VCR.

3. Connect the RF OUT of the VCR to the RF IN of the TV set.

4. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar AD-3000IP VIACCESS is

programmed to.

5. Connect the SCART cable from the TV SCART of the EchoStar AD-3000IP VIACCESS to the TV SCART from the TV

set.

6. Connect the SCART cable from the VCR SCART of the EchoStar AD-3000IP VIACCESS to the SCART of the VCR.

7. Connect the SCART cable from the DECODER SCART of the EchoStar AD-3000IP VIACCESS to the SCART of the

DECODER.

Note : Use different UHF channels for VCR and EchoStar AD-3000IP VIACCESS.

TV SCART RF IN

RF OUT RF IN VCR SCART

TV ANTENNA

VCR