Operation Manual

User Manual

Familiarization

Section 2

S/W Version 1.0 Page 2 - 5

English

2.2. USER DATA

2.2.1. SETTINGS

ANGUAGES

TV SYSTEM

■

Search channels Search channels does a channel search on the defined SAT.

■ Menu To set the language you want to use in the menus.

For multi-lingual EPG, if available, the information is shown in

the menu language. If a selected language is not transmitted,

the information is shown in the native language of that channel.

■ 1st Audio

■ 2nd Audio

To set the language for programs with multi-lingual audio.

For multi-lingual programs, if available, you can choose your

own language. The receiver will first look for the 1st selected

language, if not available, for the 2nd. If the two selected

languages are not transmitted, audio is given in the native

language of that channel.

NOTE

You can override the selection per channel with use of the

alternative audio key on the RCU.

■ 1st Subtitle To set the language for programs with multi-lingual subtitles. For

multi-lingual programs, if available, you can choose your own

language. If the selected language is not transmitted, no subtitle

is shown.

NOTE

You can override the selection per channel with use of the

alternative subtitle key on the RCU.

■ Aspect ratio To set the image size for the TV.

If you have a TV with a 4:3 screen size and the transmission is

in 16:9 format, you can select either 4:3 or 16:9.

4:3 shows the full screen completely where some of the image

sides is cut off, 16:9 will show the full image with black top and

bottom banners.

■ Video standard1 To set the video format supported by your TV (50Hz).

■ Video standard2 To set the video format supported by your TV (60Hz).

■ Signal type To set the signal format supported by your TV.

■ InfoBanner time-out When you change to another channel, the InfoBanner shows

momentarily. With this option you can set the view time for the

InfoBanner.

■ Menu animation To set the menu transition effect.