INTRODUCTION Congratulations on having chosen the cycle computer with altimeter functions from ECHOWELL. The easy operation of your new Echo-a3 will let you enjoy much fun from riding. Please read this manual carefully before using the device to get familiar with the operation logic. The altitude calculation of this cycle computer works by measuring the atmospheric pressure.
INDEX 1. BUTTON OPERATION 2. DATA SETTING MODE A-1. User data setting A-2. Calendar data setting A-3. Clock setting A-4. Target Zone setting A-5. EL ON/OFF setting A-6. Bike1/Bike2 setting A-7. Circumference data setting A-8. ODO data setting A-9. T.RT data setting A-10. Alti Gain data setting A-11. Alti Loss data setting A-12. Calory data setting A-13. LCD setting 3. SETTING SHORT CUT 4. FUNCTION GROUP MAP EN 2 EN 4 EN 5 EN 5 EN 6 EN 6 EN 7 EN 7 EN 7 EN 8 EN 8 EN 8 EN 9 EN 9 EN 9 EN 10 EN 11 5.
BUTTON OPERATION 1. Data setting mode: A button: Press for change or increase setting digital. Hold 1's for auto increase. B button: Press for change setting digital. C button: Press for quit data setting mode. D button: No function. E button: Press for enter next data setting mode. Current Altitude Current Speed Current BPM Function Data Data setting Process (ex.
BUTTON OPERATION 2. Operating mode: A button: Press for change function Group. Hold 3's for data reset. (see figure at right) B button: Press for change function mode. C button: Press for enter/quit data setting mode. D button: Press for select Bike1 or Bike2. E button: Press for turn on back-light 5's. A button+B button: Hold 3's for enter altitude adjust mode. A button: Press for change function Group. Hold 3's for data reset. ex. [SPEED] → MAX SPD. 3.
DATA SETTING MODE INITIATE THE MAIN UNIT ENTER DATA SETTING MODE ALL CLEAR: UNIT SELECTION 1. Hold the A button, B button and C button simultaneously for 3 seconds to initiate the computer and clear all data. 2. The LCD segments will be tested automatically after the unit is initiated. 3. Press any Button to stop LCD test in order to set UNIT. 4. Press A button to choose”KG” or “Lb”.(pound) 5. Press E buton to begin USER DATA SETTING. A-1.
DATA SETTING MODE A-1. USER DATA SETTING A-2. CALENDAR DATA SETTING 1. Press A button to change “MALE” or “FEMALE”. 2. Press B button to change the setting digit. 3. Press A button to increase the age by 1. 4. Press B button to change the setting digit. 5. Press A button to increase the weight by 1. A-2. CALENDAR DATA SETTING A-3. CLOCK SETTING 1. Press E button to begin CALENDAR DATA SETTING.. 2. Press A button to increase the YEAR by 1. 3. Press B button to set MONTH. EN 5 4.
A-3. CLOCK SETTING DATA SETTING MODE A-4. TARGET ZONE SETTING 1. Press E button to begin CLOCK SETTING. 2. Press A button to select 12H or 24H. 3. Press B button to set HOUR. 4. Press A button to increase the HOUR by 1. 5. Press B button to set MINUTE. 6. Press A button to increase the MINUTE by 1. 7. Press B button to set SECOND. 8. Press A button to reset the SECOND to 00. A-4. TARGET ZONE SETTING A-5. EL ON/OFF SETTING EN 6 1. Press E button to begin TARGET ZONE SETTING. 2.
A-5. EL ON/OFF SETTING DATA SETTING MODE A-6. BIKE1/BIKE2 A-6. BIKE1/ BIKE2 SETTING A-7. CIRCUMFERENCE DATA SETTING 1. Press A button to set Bike1 or Bike2.. 2. Press E button to set circumference. 1. Press E button to change EL ON/OFF SETTING. 2. Press A button to ON or OFF the EL. (also see page EN21). A-7. CIRCUMFERENCE DATA SETTING A-8. ODO DATA SETTING EN 7 1. Press E button to begin CIRCUMFERENCE SETTING. 2. It shows the default value “c2155” (2155 mm).
DATA SETTING MODE A-8. ODO DATA SETTING (Odometer bike1/2) A-9. T.RT DATA SETTING A-9. T.RT DATA SETTING (Total riding time bike1/2) 1. Press E button to begin ODO SETTING. ODO Data setting range is 0~999999Km (Mile). 2. Adjust the ODO as instruction in DATA SETTING processes. A-10. ALTI GAIN DATA SETTING (Total altitude gain bike1/2) A-10. ALTI GAIN DATA SETTING 1. Press E button to begin T.RT SETTING. T.RT Data setting range is 0000h00m~9999h59m. 2. Adjust the T.
DATA SETTING MODE A-11. ALTI LOSS DATA SETTING (Total altitude loss bike1/2) A-12. CALORY DATA SETTING (Calory consumption bike1/2) A-12. CALORY SETTING A-13. LCD SETTING 1. Press E button to begin CALORY SETTING. CALORY Data setting range is 0~999999kcal. 2. Adjust the CALORY as instruction in DATA SETTING processes. 1. Press E button to begin ALTI LOSS SETTING. ALTI LOSS Data setting range is 0~999999 m (ft). 2. Adjust the ALTI LOSS as instruction in DATA SETTING processes. A-13.
DATA SETTING MODE SETTING SHORT CUT ODO Odometer bike1/2 T.RT Total riding time bike1/2 ALTI GAIN Trip altitude gain bike1/2 ALTI LOSS Trip altitude loss bike1/2 CALORY Calory consumption bik 1/2 A-8. ODO DATA SETTING A-9. T.RT DATA SETTING A-10. ALTI GAIN DATA SETTING A-11. ALTI LOSS DATA SETTING A-12. CALORY DATA SETTING EN 8 EN 8 EN 8 EN 9 EN 9 You can directly enter setting mode from these functions in total function group by pressing C button.
FUNCTION GROUP MAP Instant function group 12/24H clock Calory consumption per hour Current Heart Rate intensity Current altitude ascent Current altitude descent Calendar Speed function group Heart Rate function group Average speed bike1/2 Averageg Heart Rate bike1/2 Maximum speed bike1/2 Maximum Heart Rate bike1/2 Trip distance bike1/2 Heart Rate target zone setting Riding time bike 1/2 Time in target zone bike1/2 Distance per day Time over target zone bike1/2 Calory consumption bike1/2 Altitud
FUNCTION GROUP SEQUENCY [INSTANT] [SPEED] [PULSE] [ALTITUDE] EN 12 [TEMPERATURE] [TOTAL]
FUNCTION GROUP SEQUENCY B-1. [INST.] INSTANT FUNCTION GROUP Instant 12/24H clock Temperature Calory consumption per hour Current Heart Rate intensity Current altitude ascent ASCENT % Current altitude descent DESCENT % Shown only when riding. B-2.
FUNCTION GROUP SEQUENCY B-2. [SPEED] SPEED FUNCTION GROUP Speed Average speed bike1/2 Maximum speed bike1/2 Trip distance bike1/2 Riding time bike1/2 Distance per day B-3. PULSE Function B-3. [PULSE] PULSE FUNCTION GROUP Pulse Averageg Heart Rate Maximum Heart Rate target Time in Time over target zone Calory bike1/2 Heart Rate bike1/2 zone setting target zone bike1/2 bike1/2 consumption bike1/2 B-4.
FUNCTION GROUP SEQUENCY B-4. [ALTI] ALTITUDE FUNCTION GROUP Altitude Trip altitude gain bike1/2 Trip altitude loss bike1/2 Maximum altitude bike1/2 Minimum altitude bike1/2 Trip Averageg altitude Trip Averageg Trip Maximum ascent ascent bike1/2 altitude descent bike1/2 altitude bike1/2 B-5. [TEMP] TEMPERATURE FUNCTION GROUP Temperature Maximum temperature Minimum temperature B-5. TEMP Function Barometer B-6.
FUNCTION GROUP SEQUENCY B-6. [TOTAL] TOTAL FUNCTION GROUP Total B-1. INSTANT Odometer bike1/2 Total calory consumption bike1+2 Total riding time bike1/2 Total altitude loss bike1+2 Total altitude gain bike1/2 Total altitude gain bike1+2 Total altitude loss bike1/2 Total riding time bike1+2 Total calory consumption bike1/2 Total odometer bike1+2 ex.
FUNCTION DESCRIPTION Clock & Temperature: 12HR AM/PM or 24HR Clock / °C or °F 1. When the user sets the clock time in Data Setting Mode, there are two formats for option-- 12H and 24H. 2. 12H means 12 hours,24H means 24 hours. 3. With this function, this computer will display the current temperature. CALORY/H: Calories per hour 1. Calculates the expended calories per hour based on the current heart rate. 2. Increasing or decreasing the heart rate intensity can control target calorie consumption. 3.
FUNCTION DESCRIPTION the maximum speed record will be cleared. DISTANCE: Trip Distance bike1/2 1. DISTANCE refers to the accumulated distance during a trip. 2. Whenever you reset the computer or change the battery, the trip distance record will be cleared. RIDETIME: Riding Time bike1/2 1. RIDETIME refers to the accumulated riding time of a trip. 2. Whenever you reset the computer or change the battery, the trip distance record will be cleared. 3.
FUNCTION DESCRIPTION ALTI: Current Altitude 1. The current altitude is always displayed on the upper display. 2. To get accurate basis altitude, the cyclist should calibrate the altitude before each ride. 3. The measurement is based on the principle that atmospheric pressure decreases as elevation increases. 4. The altitude is measured by means of the atmospheric pressure, so it's weather- dependent. 5. You may obtain the altitude data from a topographic map or the Internet. 6.
FUNCTION DESCRIPTION TEMP: Temperature Temperature would be automatically detected under this mode. You could choose either in °C or °F to display the temperature. This function would bring you the joy of riding outdoors. MAX TEMP/MIN TEMP: Maximum temperature / Minimum temperature 1. With this function, the computer will display the Maximum temperature / Minimum temperature during riding. 2.
EL BACK-LIGHT BACK-LIGHT MODE EL LIGHT ON EL back-light 1. The symbol " " will apper to indicate the EL back-light functuon is at working status. 2. The EL back-light will light 5 seconds after press E button. ALTITUDE ADJUST MODE ● Under the unit of “m”, the altitude adjustment range is within -499~ +7999.
HOW TO START SPEED, AND HEART RATE MEASUREMENT? Put the main unit on the bracket, and the main unit will auto start to measure the speed. Put the main unit on the bracket When it shows sleeping mode, you can pressing A button or B button or E button to wake it up and start to measure the speed. For Heart Rate measurement, you need to put on the chest belt.
SPECIFICATIONS Symbol Specifications Function Symbol 12/24H clock Current Temperature 1H:00M:00S-12H:59M:59S 0H:00M:00S-23H:59M:59S -10°C-60°C / 14°F-140°F Calory consumption per 0-9999Kcal Current HR intensity 0-100% Current altitude ascent 0-99% Current altitude descent 0-99% Calendar MM:DD:YY week 2000-2099 Speed function group Average speed bike1/2 0-199.9km/h / 0-120.0m/h Maximum speed bike1/2 0-199.9km/h / 0-120.0m/h Trip distance bike1/2 0-999.
SPECIFICATIONS Symbol Function Specifications Special Function 1.
SPECIFICATIONS WHEEL CIRCUMFERENCE MEASUREMENT POPULAR TIRES CIRCUMFERENCE REFERENCE TABLE Tire Size 18 Inch Precise Measurement Roll the wheel until the valve stem is at lowest point to the ground. Then mark this first point on the ground. Get on the bicycle and have a helper push you until the valve stem returns to lowest point. Mark the second point on the ground. Measure the distance between the marks. Enter this value to set the wheel circumference. 20 Inch 22 Inch 24x1.75 24 Inch 24x 1 3/8 26x1.
BATTERY CHANGE Main Unit Battery Change Chest Belt Battery Change Speed Transmitter Battery Change COIN Battery cap Test battery COIN CR2032 Battery cap Cap CR2032 CR2032 EN 26
TROUBLE SHOOTING PROBLEM Main unit No display CHECK ITEMS 1. Is the battery dead? 2. Is there incorrect battery installation? REMEDY 1. Replace the battery. 2. Be sure that the positive pole of the battery is facing the battery cap. Speed 1. Is the computer in the setting mode? 1. Refer to the setting procedures to finish the setting. not displayed 2. Are the magnet and the Sensor/Transmitter in 2.
PRECAUTIONS 1. Watch the road. Don't pay much attention to your cycle computer functions during riding to avoid accidents. 2. Don't expose the main unit to direct sunlight for a long time while you're not riding with it. Never disassemble the device or the accessories. 3. Don't poke a needle or any pointed article into the hole on the bottom of the main unit. To poke anything into the hole may damage the pressure sensor inside the device. 4.
Operating Temperature Storage Temperature: Sensor & Transmitter: Suitable Fork Sizes: Battery Operating Life: Dimensions & Weight 0°C - 50°C (32°F - 122 °F) -10°C - 60°C (14°F - 140°F) No-contact magnet sensor with wireless transmitter 12 mm - 50 mm (0.5" - 2.0") CR2032 in Main Unit: About 6 months (based on the average riding time of 1.5 hours per day) CR2032 in Speed Transmitter Around 24000 km (15000 miles) CR2032 in Chest Belt Average 1300 hours. (You can change the battery by yourself.