User's Manual

10
Redialling
It is possible to redial the last number dialled by the current user. To
do so:
1. Hook off.
2. Press:
3. Press:
4. To initiate the call, press:
A ringing tone is now heard from the handset. To go on with the call,
follow the steps described in connection with “Making a manual call”,
beginning with step 4.
Security Lock Function
The handset can be protected against unauthorized use via the
security lock function. This works together with the list of user names
and corresponding passwords. The security lock requires that the
user selects his user name from the list, and then keys in his
personal password before the handset can be used for making calls.
The default password for all the users on the user list is “password”,
i.e. 61778562. Passwords can be edited in the Setup/Password
menu (the user’s own password) or in the /Setup/Users menu using
(Passwords of users with a lower priority than the current user).
The security lock function ensures that only users recognized by the
system can unlock the handset and make calls through the Iridium
system.
Answering incoming calls is not protected by the security lock.
Note that from a PSTN phone (stand alone or via PBX), the security
lock is not an option.
The security lock function affects all control units. That means that if
one control unit disables the lock, the lock is disabled on all control
units connected. The same goes for enabling the lock.
User ID/User Name List
Every user specified in the system is given a priority value. The
priority value determines what the user is allowed to do in the
system. By default, the user list contains 6 entries with different
priority values. The 6 default users are shown below.
User ID/User Name
Priority value
SUPER USER 0
Captain 1
Commander 4
Officer 10
Crew 100
Passenger 200
The super user has the highest priority in the system and is therefore
not restricted in any action. The super user can edit all other users. A
user can create, edit, and delete users of a lower priority; e.g. a user
of priority value 4 may create, edit, and delete users of priority
values 10, 100, and 200.
Each facility/function in the handset has a priority value. The priority
value of the facility/item and the user’s priority value determine
whether the user has access to the item or not.
The user ID is written in the call log so it is possible to identify who
has made which calls.
Disabling Security Lock
To disable the security lock, the user has to be identified with a
priority value of 4 or less (Commander, Captain, or SUPER USER).
To disable the security lock:
1. To enter the function menu, press:
2. To select the “Setup” item, press:
3. Find the “Lock” item using:
and press:
0141