Specifications

Installation B-FOCuS O-4F2P
3-4 ECI Telecom Ltd. Proprietary
Wall or Table-Top Mounting
Wall Installation - Recommended
The ONT must be installed with the cables leaving the ONT in the downward
direction. The placement of the ONT should leave at least 8 cm of free space
below the ONT for cables to exit with an adequate bend radius. Two
centimeters should be left free on all sides of the unit to allow ventilation.
Figure 6: ONT Mounting
On the wall, draw a horizontal line 3 cm from the top of where the ONT is to
be placed.
On the line that you have drawn, mark two holes as shown in Figure 6 showing
how the ONT is to be m
ounted and drill 2 holes for 3.5 x30 mm screws.
Fix the two mounting screw in place and slide the ONT onto the mounting
screws until it is locked in place.
11 cm