Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 14
Note: You cannot change the VCI and VPI values using the Modify command. Instead,
delete the old line from the table at the bottom of the dialog box and add a new line
with the new parameters.
 To delete a configuration:
1. Select the line you want to delete from the table at the bottom of the dialog box.
2. Click Delete.
3. Check that the line is deleted from the table at the bottom of the dialog box.
4.3. LAN Setup
When the LAN Setup menu is selected from the Basic menu, the LAN Setup dialog
box appears:
Define the IP address and subnet mask of the router towards the LAN (port eth0) and
click Apply.
4.4. Routing Setup
When the Routing Setup menu is selected from the Basic menu, the Routing Setup
dialog box appears.
The table displays all the routers recognized in the network. It contains both static
routing lines that can be edited (added, edited, deleted) and dynamic routing lines,
generated dynamically by the router’s communication protocol. The routing table
defines through which port each packet is sent, according to its specified destination.