Specifications
B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 23
2. Define the rule’s parameters:
• Precedence (an integer from 1 to 64K).
• Source IP address and subnet mask.
• Destination IP address and subnet mask.
• Source port range.
• Destination port range (use the list).
• Protocol.
• When TCP is selected, you may define also specific flags.
5. Apply the rule to the traffic via the firewall. You can do this in one of two ways:
• Define a new Action ID. In this case you should define:
• An interface (selected from the list).
• The direction of traffic relative to the WAN (“In” refers to Upstream –
from LAN to WAN, “Out” refers to Downstream – from WAN to LAN).
• The action applied to the specified traffic – Allow or Deny.
• Time range for the rule’s application.
• Apply an existing Action ID.