Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 34
2. Select an interface from the list. You can only select interfaces that have
previously been defined as members of the bridging group.
3. Define virtual channels (Vpi and Vci).
4. Select the type of encapsulation.
5. Click Apply.
6. Check that the interface has been added to the list.
 To delete an existing bridging group:
Click Flush.
 To activate the defined bridge entries:
Click Enable.
Note: The workflow is as follows: Define an EoA configuration. Click Flush. Define a
bridging group. Add an interface. Click Enable. Finally open the Configure menu and
validate that the status of all the interfaces defined within the group is Bridged.
5.7.2. Spanning Tree
The Spanning Tree tab presents the definition of links within the tree: links to bridges
in the WAN, the state of transfer, priority and cost.
 To see additional parameters:
Click STP Parameters. A list of Spanning Tree parameters appears.
 To modify the values of some parameters:
1. Click Config Port. The Port Configuration dialog box appears.