Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 47
11. From the Basic menu select WAN Setup. Check that the channel you have
defined appears in Router mode and that NAPT is in the On state.
6.4. Defining Classical IPoA per RFC 1577
Classical IPoA per RFC 1577 can only be done using the Advanced method.
 To define Classical IPoA:
1. From the Advanced menu select Configure.
2. From the list of interfaces select an available ATM interface (in this example
atm5) and click Configure Interface. The ATM Interface Configuration dialog
box appears.
3. Define the name of the interface, the IP address and subnet mask in the WAN and
the MTU value. Change the status to UP.
4. Click Apply. Check that the definitions appear in the list of interfaces.
5. In the VCC tab click Add.
6. Define the VCC parameters.
7. Select the IPoA radio button. Select the ATM5 interface.