Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 48
8. There are two options:
• If you check the Default PVC checkbox, you should define specific VC and
VP and the traffic shaping parameters.
• If you uncheck the Default PVC checkbox, define the next hop IP address – an
address in the WAN from which the routing continues.
9. In both cases click Apply. Check that the newly defined interface appears in the
VCC list.
10. Click Show VCC Quality and validate that the traffic shaping parameters appear
as you have defined them.
11. Click Close to close the pop-up window.
12. To activate NAT, select the Interface tab and click NAT. The NAT Configuration
dialog box appears.