Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 50
6.5.2. Basic Workflow
 To define PPP over ATM using the advanced method:
1. From the Advanced operations menu select WAN Configure.
2. In the VCC tab click Add. The VCC Configuration dialog box appears.
3. Select the PPPoA radio button. Define: VPI, VCI, Profile ID, user name
(<name>@<domain>) and password, authentication protocol (PAP), a ppp
interface, encapsulation type (VC), subnet mask and trace. Enable NAT.
Note: You can define a few Profile IDs, but only one of them is active. This means that you
can define a few users on the same interface, but when one of them is connected to
the ISP, the others cannot be connected.
4. Click Apply. Check that a line is added in the VCC tab.
5. Select the PPPoA tab and check that the interfaces you have defined are displayed.
6. Note that the interface you have defined in the Basic menu appears in ppp0 (the
first available ppp interface, before the one you have defined in the Advanced
menu is selected by default). It has been assigned by default Profile ID 0. The
interface you have defined in the Advanced menu appears with the values you
have just defined.
7. If you have defined a few channels, you must identify one of them as the default
channel. Click one of the radio buttons and click Default. The selected interface’s
Default parameter becomes Yes.