Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 8
4. Check that the name of the Network Interface Card you used for connecting the
computer to the router’s eth0 port appears in the Connect using field. Select
Internet Protocol (TCP/IP) and then click Properties. The Internet Protocol
(TCP/IP) Properties dialog box appears.
5. Select the Use the following IP address radio button. Define a unique IP address
for the computer, in the same subnet where the router is defined (its format should
be 192.168.1.n, where n is a unique integer from 2 to 255). In the Subnet mask
field, enter 255.255.255.0. In the Default gateway field, enter 192.168.1.1 (the
router’s IP address.
6. Click OK. The Local Area Connection Properties dialog box reappears.
7. Click OK. The Local Area Connection Status dialog box reappears.
8. Click Close to close the definition dialog box.