User manual

14
 INPUT 4: mono and balanced microphone input, with 3-pin XLR connector
on rear panel and COMBO connector on front panel. Unbalanced stereo line
input with RCA connectors on rear panel.
o COMBO connector:
XLR TRS jack
 Hot or direct signal > Pin 2 Tip
 Cold or inverted signal > Pin 3 Ring
 Ground > Pin 1 Sleeve
5. TRS jack connector
On the rear panel of the unit, a PHANTOM ON/OFF switch allows supplying inputs 2
to 4 with phantom power (48 VDC) for microphones that require it, usually
condenser mics.