User manual

13
6. EFFECT PERFORMANCE
6.1 Mixer effect controls
FX SEND selector (10)
A very flexible multi-channel assignment
system allows the user to process various
input channels at the same time. The FX
SEND button assign the channel to the
internal effect processor and EXTERNAL
FX loop.
The FX SEND signal is Pre-fader by
default. If FX LAUNCH button is ON and
EFFECT selector is activated, the FX
SEND signal gets Post-fader.
For EXTERNAL FX processing, the
NUO5 has an external loop RCA
connection SEND (45) and RECEIVE
(46). Like the internal effect processing,
each channel can be assigned to the
EXTERNAL FX loop pressing the FX
SEND button. The FX SEND signal is
pre-fader by default, but is automatically
changed to post- fader if the 3 buttons FX
SEND (10), EFFECT (Encoder 33) and
FX LAUNCH (23) are activated. To use
the EXTERNAL FX “post-fader”, without
processing the internal NUO5 effects,
activate the 3 buttons FX SEND, EFFECT
(Encoder) and FX LAUNCH, and place
the WET-DRY crossfader (25) on “DRY”.
The FX SEND push button also controls the MIDI START/STOP functions. Please refer to chapter 8. MIDI USAGE.
Rotary/Push control EFFECT (33)
Choose the effect with the rotary control, and push the knob to activate/deactivate it. The NUO5 mixer offers 8
digital beat synchronized effects, 2 manual filters and 2 specific voice effects.
When the effect is activated, the led is blinking ; if the effect is only prepared and not activated then the led is stop
blinking (fix led). To send the activated effect in the mixer outputs, both the EFFECT control and FX LAUNCH
button (23) must be activated.
Each time you activate the LFO, Flanger, Phaser and Echo Flanger, the oscillation wave is reinitialised.
You can prepare a second effect (fix led) while one effect is activated (blinking led) ; push one time the EFFECT
control to simultaneously activate the second effect and deactivate the first one.
D
Y
R
10
Pitch Shifter
FX CUE
FX INPUT
Flanger Echo
Echo Reverb
Filtered Echo
High Pass Filter
Phaser
Vocoder
Flanger
Reverb
Delay
Low Pass Filter
L.F.O. Filter
W
FX LAUNCH
T
E
TAP
SELECT
REF.
PARAMETER
TIME
EFFECT
+2
-10
-38
-30
-20
-7
-4
-2
0
+4
+7
+10
+2
-38
-30
-20
-10
-7
-4
-2
0
+4
+7
+10
FX SEND FX SEND FX SEND
0
FX SEND FX SEND
10
33
31
30
27
28
25
23