user manual

8484

Buttons [1] to [4]

[FUNC] button

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected

■ How to operate the Digital Sound

Processor

In case the 39011 Digital Sound Unit is connected to the CD

Tuner, a CD recorded by DTS cannot be decoded.

Music can be enjoyed more comfortably by modifying the

speaker settings.

▼Setting the speaker size

The size of each speaker is switched.

1. Press the [FUNC] button.

2. Press and hold button [3] for more than two

seconds to shift to the setting mode.

3. Press button [1] to shift to the speaker setting

mode.

4. Switch the settings by pressing the button

corresponding to each speaker.

Button [1]: Front speaker

Large/small

Button [2]: Rear speaker

Large/small/none

Button [3]: Center speaker

Large/small/none

Button [4]: Woofer speaker

Yes/no

5. Press the [FUNC] button to return to the setting

mode.

6. Press the [FUNC] button again to cancel the setting

mode.