User Guide

112
How to operate the tuner
Changing the radio band location
The location for the radio bands used between the North American region
and the Asia/Australia/Latin region can be switched. The default setting is
USA (North America).
Check that the deck is in standby mode.
Press and hold button [3], then the [FM AM] button, and
hold both for more than three seconds.
The radio band switches in the order shown below each time the
buttons are pressed.
After this, the broadcast stations will be searched for
automatically and stored in buttons [1] to [6].
When an optional HD Radio tuner unit is connected, radio band
location is set to USA. Other radio band locations are unavailable.
(U.S.A. only)
[FM AM] button
Button [3]
USA ASIA
AUS
LATIN
CD8445.book 112 ページ ２００４年１２月１３日 月曜日 午前１１時３０分