answers 2 Technical Manual Mainboard D2140 English
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com oder http://www.fujitsu-siemens.com/mainboards Are there ... ... any technical problems or other questions you need clarified? Please contact: • your sales partner • your sales outlet The latest information on our products, tips, updates, etc.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Published by Fujitsu Siemens Computers GmbH Order No.
Deutsch English Mainboard D2140 Technisches Handbuch Technical Manual Ausgabe November 2004 November 2004 edition
Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA. Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation. PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc. Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt.
Übersicht/Overview Mainboard D2140 1= 2= Stromversorgung / Power supply Diskettenlaufwerk / Floppy disk drive IDE-Laufwerke 3/4 / IDE-drives 3/4 Bedienfeld / Front panel IDE-Laufwerke 1/2 / IDE-drives 1/2 Batterie / Battery USB Zusätzliche Stromversorgung / Additional power supply +12 V 1 DIMM 2 DIMM 1 2 3 8 4 3= 4= 5= 6= 7= 8= 5 Optionale Komponenten / Optional components 6 PCI 1 PCI 2 PCI 3 7 Externe Anschlüsse / External connectors Bedienfeld / Front panel Power On/Off Reset 1) 3) HD-LED
Contents Mainboard D2140................................................................................................................................ 1 Notational conventions ................................................................................................................. 1 Important notes..................................................................................................................................... 2 Information about boards ..........................................
Mainboard D2140 Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard. Additional information Information on the BIOS Setup and additional descriptions of the drivers are contained: ● in the readme files on your hard disk ● on the driver floppy disks included ● on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".
Important notes Important notes With the mainboard installed you must open the system to access the mainboard. How to dismantle and reassemble the system is described in the operating manual accompanying the system. Connecting cables for peripherals must be adequately insulated to avoid interference. ! Observe the safety notes in the operating manual of your system. Incorrect replacement of the lithium battery may lead to a risk of explosion.
List of features List of features Onboard features Chipset SiS661FX /964 Board size µATX VGA ! Audio / 6-channel / S/PDIF 5.1 Buzzer / int. Speaker Support LAN 1 Gbit / 100 Mbit / 10 Mbit LAN ASF / with Alert-on-LAN / WoL / Boot SATA / ATA / RAID FireWire D2140-A TM / USB 2.
List of features Internal ports D2140-A DIMM Sockets (DDR 400, SDRAM, PC3200) 2 AGP Slot (2/4/8x, 32 bit, 66 MHz, 1.5 V) - PCI slot (32 bit, 33 MHz, 3.3 V, Rev. 2.3) 3 CNR Slot (Type A, AC‘97 only) - Serial ATA interface (150 Mbyte/s) / ATA interface (100 Mbyte/s) / Floppy interface -/2/1 S/PDIF 5.1 (digital Audio)* OUT / IN -/- Audio Input - Front panel Audio (9-pin for headphone, microphone) - FireWire TM * (9-Pin, Intel standard header) - USB Ports* (2.
List of features Special features Your mainboard is available in different configuration levels. Depending on the configuration, your mainboard is equipped with or supports the features described in the following. Silent Fan LT A controller regulates the processor fan in the PC and thus prevents unnecessary noise pollution. The controller operates independently of the operating system and the processor. Silent Drives Hard disks and optical drives (CD-ROM, CD-RW, DVD etc.
Brief instructions on installing mainboard If you have purchased a separate mainboard, you can install it in your system in accordance with the following brief instructions. The activities described here assume a basic knowledge of PCs and cannot be carried out by a layperson. If you are not sure whether you have the necessary specialised knowledge, then leave this work to an expert. The illustrations of the system show examples of possible cases.
Brief instructions on installing mainboard Installation ► Equip the mainboard with the processor, heat sink and memory modules before installation if possible. Further information can be found in "Replacing the processor" chapter. ► Open the casing as described in the operating manual. ► Should no suitable connection field be provided in the case, then you must install the connection field (1) provided. Ensure the plate is aligned properly so that the connections are suitable for the mainboard later.
Interfaces and connectors The positions of the interfaces and connectors are shown on page "Cover". The components and connectors marked are not necessarily present on the mainboard. External ports The positions of the external ports are shown on page "Cover".
Internal ports and connectors Internal ports and connectors The positions of the internal ports and connectors are shown on the Cover. Additional information on some ports is also provided here. Hard disk connection An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode. ► Connect the end of the cable marked with blue to the mainboard.
Internal ports and connectors Using external audio connections Analogue 2-channel audio output With the 2-channel configuration the functions Line-Out, Line-In and MIC are available. 1 2 3 1 = Line-In (blue) 2 = Line-Out (front channels, green) 3 = MIC (red) Analogue 4-channel audio output 1 2 3 Line-In is converted into the Rear-Out function with the 4-channel configuration.
Pin assignment of internal ports Pin assignment of internal ports The pin assignment of some internal connections is shown in English in the following. i Some of the following connectors may be optional! Power On/Off Front panel Watch the poling of the LEDs. The positive pole of the connection cables is often indicated with a coloured wire. Reset 3) HD-LED 1) 1) Power On 1) 2) LED 1 2 Recovery Password 1) Cable is not included in the delivery scope.
Pin assignment of internal ports Floppy interface 1 Pin Signal Pin Signal 1 2 3 4 5 6 7 8 9 10 GND FDHDIN (low asserted) GND not connected Key not connected GND Index (low asserted) GND Motor A Enable (low asserted) GND Drive B Select (low asserted) GND Drive A Select (low asserted) GND 18 19 20 21 22 23 24 25 26 27 Step DIR (low asserted) GND Step Pulse (low asserted) GND Write Data (low asserted) GND Write Enable (low asserted) GND Track 0 (low asserted) GND 28 29 Write Protect (low asserted) G
Pin assignment of internal ports ATA interface 2 1 Pin Signal Pin Signal 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Reset drive (low asserted) Data 7 (high asserted) Data 6 (high asserted) Data 5 (high asserted) Data 4 (high asserted) Data 3 (high asserted) Data 2 (high asserted) Data 1 (high asserted) Data 0 (high asserted) GND DRQ (high asserted) I/O write (low asserted) I/O read (low asserted) I/O ready (low asserted) DAK (low asserted) IRQ (high asserted) ADR 1 (high asserted) ADR 0
Pin assignment of internal ports 1 Power supply BTX (ATX compatible) 13 Pin Signal Pin Signal 1 2 3 4 5 6 7 8 9 10 11 12 +3.3 V (P3V3P) +3.3 V (P3V3P) GND +5V (VCC) GND +5V (VCC) GND Powergood (high asserted) +5 V Auxiliary (VCC Aux) +12 V (P12VP) +12 V (P12VP) 13 14 15 16 17 18 19 20 21 22 23 24 +3.
Settings with switches and jumpers Setting via control-panel plug connector i A 1 2 Pin pair A inserted = Skipping system and BIOS Setup password B 1 2 Pin pair B inserted = System BIOS recovery C 1 2 Pin pair C inserted = factory setting Please pay attention on the exact position of the pin pairs! Skipping system and BIOS Setup password - pinpair A Pinpair A enables skipping the system and BIOS Setup password.
Add-on modules / Upgrading ! Exit energy-saving mode, switch off the system and remove the power plug from the mains outlet, before carrying out any of the procedures described in this chapter! Even when you have run down the device, parts of the device (e.g. memory modules, PCI extension boards) are still energised. Replacing the processor Technical data ● Intel Pentium 4 with 533 or 800 MHz front side bus in the LGA775 design (Value FMB).
Replacing the processor ► Remove the old processor (2) from the socket. a ► Insert the new processor in the socket so that the marking of the processor is aligned with the marking on the socket (a). 1 2 3 ► Fold down the frame (1). ► Press the lever downward (2) until it is hooked in again (3).
Replacing the processor Mounting heat sink Be sure to use heat conducting material between the processor and the heat sink. If a heat conducting pad (rubber-like foil) is already applied to the heat sink, then use it. Otherwise you must apply a very thin layer of heat conducting paste. Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and apply new heat conducting paste before you remount it.
Upgrading main memory Upgrading main memory Technical data Technology: DDR 333 or DDR 400 unbuffered DIMM modules 184-Pin; 2.5 V; 64 Bit, without ECC Size: 128 Mbyte to 2 Gbyte 333 DDR-SDRAM 128 Mbyte to 2 Gbyte 400 DDR-SDRAM Granularity: 128, 256, 512 or 1024 Mbyte for one socket A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards. At least one memory module must be installed.
Adding PCI cards Removing a memory module 1 1 ► Push the clips on the right and left of the memory slot outward (1). ► Pull the memory module out of the memory slot (2). Adding PCI cards Technical data 32 bit / 33 MHz PCI slots 3,3 V supply voltage 3.3 V auxiliary voltage Rev. 2.
Adding PCI cards PCI bus interrupts - Selecting correct PCI slot i To achieve optimum stability, performance and compatibility, avoid the multiple use of ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all involved devices and their drivers must support IRQ sharing. PCI IRQ Lines connect AGP slots, PCI slots and onboard components to the interrupt controller. PCI IRQ Lines are permanently wired on the mainboard.
Replacing the lithium battery Replacing the lithium battery In order to permanently save the system information, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding error message notifies the user when the charge is too low or the battery is empty. The lithium battery must then be replaced.
BIOS update BIOS update When should a BIOS update be carried out? Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new operating systems, new software or new hardware. In addition, new BIOS functions can also be integrated. A BIOS update should always also be carried out when a problem exists that cannot be solved with new drivers or new software. Where can I obtain BIOS updates? The BIOS updates are available on the Internet at www.fujitsu-siemens.de/mainboards.
BIOS Recovery - Recovering System BIOS BIOS Recovery - Recovering System BIOS i ► All BIOS settings are reset to the default values. Open the casing as described in the operating manual. ► Set the switch for "Restore system BIOS" to ON. ► Close the casing as described in the operating manual. ► Insert a BIOS update floppy disk and start the PC. ► Note the signals issued from the loudspeaker.
Microcode Update Microcode Update What is a microcode update? As there are no drivers for processors, Intel offers the possibility from the P6 family (Pentium Pro) on to update the command set (microcode) of the processor. This enables minor errors to be corrected and the performance to be increased. To guarantee the best possible performance and error-free operation, Intel recommends updating the microcode for every new processor.
Drivers Drivers Only when no drivers are installed on your system, or you want to update these, proceed as follows: ► Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive. ► If the CD does not start automatically, run the START.EXE programme in the main directory of the CD. ► Select DeskUpdate - Fully automatic installation. ► Follow the instructions on screen.
Error messages This chapter contains error messages generated by the mainboard. Available CPUs do not support the same bus frequency - System halted! Memory type mixing detected Non Fujitsu Siemens Memory Module detected - Warranty void There are more than 32 32 RDRAM devices in the system Check whether the system configuration has changed. If necessary, correct the settings.
Error messages DMA test failed EISA CMOS not writable Extended RAM Failed at offset: nnnn Extended RAM Failed at address line: nnnn Failing Bits: nnnn Fail-Safe Timer NMI failed Multiple-bit ECC error occurred Memory decreased in size Memory size found by POST differed from EISA CMOS Single-bit ECC error occurred Software NMI failed System memory exceeds the CPU’s caching limit System RAM Failed at offset: nnnn Shadow RAM Failed at offset: nnnn Switch the device off and on again.
Error messages Missing or invalid NVRAM token Switch the device off and on again. If the message is still displayed, please contact your sales outlet or customer service centre. Monitor type does not match CMOS - RUN SETUP Correct the entry for the monitor type in the Main menu of the BIOS Setup. On Board PCI VGA not configured for Bus Master In the BIOS Setup, in the Advanced menu, submenu PCI Configuration, set the Shared PCI Master Assignment entry to VGA.
Error messages System battery is dead - Replace and run SETUP Replace the lithium battery on the mainboard and redo the settings in the BIOS Setup. System Cache Error - Cache disabled Switch the device off and on again. If the message is still displayed, please contact your sales outlet or customer service centre. System CMOS checksum bad - - Default configuration used Call the BIOS Setup and correct the previously made entries or set the default entries.
Glossary The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. Not all technical terms and abbreviations listed here are valid for the described mainboard.
