Measurement Guide

BAMBOO ROMAN SHADE

INSTALLATION INSTRUCTIONS

What You Will Need:

∙ Drill

∙ Pencil

∙ Step Ladder

∙ Tape Measure

∙ Small Level

∙ Light Weight Hammer

∙ Screwdriver

Step 1: Measure bracket placement/mounting location and mark with a pencil.

Step 2: Install brackets (use anchors if mounting to drywall)

PAGE 1
BAMBOO ROMAN SHADE INSTALLATION INSTRUCTIONS What You Will Need: ∙ Drill ∙ Pencil ∙ Step Ladder ∙ Tape Measure ∙ Small Level ∙ Light Weight Hammer ∙ Screwdriver Step 1: Measure bracket placement/mounting location and mark with a pencil.
PAGE 2
BAMBOO ROMAN SHADE INSTALLATION INSTRUCTIONS Step 3: Install shades Line the shade and mounting bracket up. Connect washer and wing nut to the screw. Step 3 (Part 2): Connecting the headrail to the mounting bracket (A), to washers (C), and wing nuts (D). Step 4: Operating Your Shade To lower and raise your shade, pull shade from the center of the bottom rail. Maintaining Your Shade: Dust your shade with a clean cloth or feather duster.