Owner`s manual

− 0 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
角度調整ボルト穴
30°
45°
60°
- Installing on a wall (installation example) -
If the speaker angle is 30°
Speaker arm : Reverse
If the speaker angle is 45°
Speaker arm : Reverse
If the speaker angle is 60°
Speaker arm : Reverse
Alignment mark：
Alignment mark：
Alignment mark
：
For the TD508MK3
Fine adjustment range：20° ～ 45°
(
󰜏
Refer to P.32.
)
Fine adjustment range：35° ～ 60°
(
󰜏
Refer to P.32.
)
Fine adjustment range：50° ～ 75°
(
󰜏
Refer to P.32.
)
󰝟
Speaker
Speaker base
Speaker arm

 Select an installation method for the speaker arm in
accordance with the speaker installation angle that will
be used at the installation location.

 Install the speaker on the wall.
The only speaker which can be installed on a wall is the
TD508MK3. The TD510MK2 cannot be installed on a wall.
Caution
Fixing holes
：
Side with mark
（
Mark
： ）
Fixing holes
：
Side with mark
（
Mark
： ）
Fixing holes
：
Side with mark
（
Mark
： ）
･ If installing the speaker on a wall, the direction of the
speaker arm is reversed.
･ The position of the fixing hole (mark) is important
when assembling the speaker and the speaker arm.
For details, refer to “Assembling the speaker” on P.46.
Tip
For details on the installation procedure, refer to P.41 - 47.
Tip
Fixing holes
Fixing holes
Fixing holes