Owner`s manual

− 1 −
GERMAN FRENCH ITALIAN SPANISHENGLISH
󰝡Hexagonal wrench
(large)

 Remove the screws from the bottom of the speaker base
and the speaker angle adjustment nut from the speaker
arm.
Rear view of the speaker

 Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.

 Place the speaker on its side.
Retain the adjustment nut as it will be required to lock
the unit in position.
Caution

 Remove the hexagonal head bolt from the speaker arm.
- Preparation for installation -
󰝟
Speaker
Speaker arm
Speaker arm
Screwdriver
Speaker angle adjustment nut
Speaker base
Speaker angle adjustment nut
Hexagonal head bolt
Hexagonal head bolt
󰝢Hexagonal wrench
(small)
Screws X4
The hexagonal head bolt which is removed will be used
later, so be careful not to lose it.
Tip
The 4 cover retaining screws can be kept with the
packing for future use.
Tip