Service manual

DCB, DCFCB and DCFCTB Models
51
Installation
24. 1‖ LB’s withgaskets and covers
(1‖ raceway/cabinet-siren)
2 ea.
25. Split bolts, 10 AWG wire
(2001TRB option primary
connection)
2 ea.
26. Mechanical lugs, 2 AWG wire
(2001TRB option/siren motor
feed)
6 ea.
27. Mechanical lugs, 6 AWG wire
(system ground)
4 ea.
28. #6 copper ground wire
(system ground)
75’
29. 5/8‖ x 8’ Copper Ground rod
(system ground)
1 ea.
30. Ground rod connector cold water type/
acorn style
(system ground)
1 ea.
31. 1 1/4‖ to 1‖ Reducing washer
(meter socket/O.H. service)
2 ea.
32. 1 1/4‖ Galvanized staples
(securing ground wire to pole)
30 ea.
33. 3/4‖ Galvanized staples
(securing antenna cable)
30 ea.
34. 12 AWG THHN stranded CU wire
(orange/rotator motor feed)
40’
35. 14 AWG THHN stranded CU wire
(black/charger circuit)
40‖
36. 14 AWG THHN stranded CU wire
(white/charger circuit)
40‖
37. 10 AWG THHN stranded CU wire
(black/TR option primary)
30‖
38. 16 AWG THHN stranded CU wire
(optional, black/proximity sensor)
45’
39. 16 AWG THHN stranded CU wire
(optional, brown/proximity sensor)
45’
40. 16 AWG THHN stranded CU wire
(optional, blue/proximity sensor)
45’
41. 2 AWG, 600V, stranded CU wire
(optional, 2001TRB 48V and
ground)
12’
42. Green electrical tape (33+)
(ground wire identification)
1 roll
43. Red electrical tape (33+)
(48+ wire identification)
1 roll
44. White electrical tape (33+)
(neutral wire identification)
1 roll
45. Black electrical tape (33+)
(connector insulating wrap)
1 roll
46. Blue electrical tape (33+)
(identification marking)
1 roll
47. Rubber tape
(insulating connections)
1 roll
48. Spade crimp connector
(red-14 ga. wire/charger circuit)
2 ea.
49. Ring crimp connector
(1/4‖ stud size 12 ga. wire/rotator
feed)
1 ea.
50. 1/4 x 20 3/4‖ hex head bolt
(ground connection on siren leg)
1 ea.
51. 1/4 x 20 standard flat washer
(ground connection on siren leg)
1 ea.
52. 1/4 x 20‖ intern/ extern star washer
(ground connection on siren leg)
1 ea.
53. 1/4 x 20 split washer
(ground connection on siren leg)
1 ea.
54. 1/4 x 20 hex head nut
(ground connection on siren leg)
1 ea.
55. 5/16 hex head nut
(ground connection on control
cabinet)
1ea.
56. 1/2‖x 4‖ hex head lag bolt
(securing TR option to utility pole)
3 ea.
57. 1/2‖x 6‖ hex head SS lag bolt
(securing siren/control cabinet to
utility pole)
16 ea.
58. 1/2‖ SS (stainless steel) flat washers
(backing 1/2‖ lag bolts)
19 ea.
59. 10 x 1‖ hex head, slotted, sheet metal
screws (securing straps/equip to pole)
1 box
60. 10 x 2‖ hex head, slotted, sheet metal
screws (securing straps/equip to pole)
1 box
61. 10 x 3‖ hex head, slotted, sheet metal
screws (securing straps/equip to pole)
1 box