Owner`s manual

10
Introduction
Detaching the PND
The navigation function can also be used even if the PND is detached
from the main unit.
Press .
Remove the PND.
Insert the left end of the PND into the main unit.
Insert the PND.
Precautions for PND Operation
Do not remove the SD card while operating the PND. Turn off the power to the PND,
and wait at least 3 seconds after the display goes off, before removing the SD card.
Failure to do so may cause data in the SD card to be lost or damaged.
• When the PND is removed, do not touch the connector on the back of the PND.
• When attaching the PND, do not press the monitor display.
• If the PND gets wet, do not attach it to the main unit.
• After removing the PND from the main unit, it is recommended that you use the
Audio Cover for the main unit.
Using the PND
How to detach the PND from the main unit
1
Release
2
How to Insert the PND
1
2