Owner`s manual

17
Introduction
Introduction
6 General settings
Main unit settings
You can perform various settings for this unit.
Hold down the button for more than one second to turn
off the audio mode.
Hold down the button for more than one second.
Carry out settings for the various items.
Touch .
Items Contents
Enable guide tone Turns the guide tone setting ON/OFF.
Enable AUX Turns the AUX setting ON/OFF.
Enable VTR Turns the VTR setting ON/OFF.
Dim sub-display If "Enable" has been set and the car lights (side lights, tail lights, license
plate light) are turned ON, the brightness of the sub-display can be
adjusted.
Link night view to headlight If "Enable" has been set, the PND display switches to the night view mode
when the car lights come ON.
Illumination Illumination colors can be selected from "Blue" or "Red".
Voice guidance The voice guidance of the navigation system can be selected to come
from either the left or right speaker.
Camera setting Camera setting can be selected from "AUTO" or "MANUAL".
For AUTO: Switches to the camera image when shifted into reverse gear.
For MANUAL: The camera image is displayed only by pressing
for at least one second.
Radio area
(North American models only)
Radio broadcast can be selected from "US", "Latin" or "Asia".
*
*: This operation only switches the settings of the main unit. The PND map will not
be switched.
With regards to Radio Area, please ensure that you set the system for your area.
1
SRC
2
CTRL
3
Touch .
Next
Setting screen1
Setting screen2
SCREEN AV/NAV
4
Done