Owner`s manual

19
19
● The PND display will go OFF.
● The PND display will come ON.
■ Using the PND
The navigation function can also be used
even if the PND is detached from the main
unit.
ATTENTION
For details on using PND, refer to the
operation manual of the PND.
■ How to Detach the PND from the
Main Unit
IMPORTANT
● The right-hand side of PND will be
unlatched from this receiver.
● Hold the PND on the right side, lift up and
pull it toward you to remove it.
■ Attaching the PND
● Engage the catch at the left end of the
PND with the lock on the main unit.
● Press the right-hand side of PND until it
clicks in position.
Turning the PND Display
ON and OFF
1
When the PND display is ON, hold
down the [MUTE] button for 1 or more
seconds.
2
When the PND display is OFF, press
the [SCREEN AV/NAV] button.
Detaching the PND
● When detaching the PND, take care NOT
to touch its rear side.
● After detaching the PND, mount the
connector cover to the PND rear side.
● Take care not to attach the PND to this
receiver without removing the connector
cover from the rear side.
● When attaching the PND, do not press the
monitor display.
● If the PND gets wet, do not attach it to the
main unit.
1
Press the [Release] button.
2
Remove the PND.
1
Latch the left-hand side of PND to this
receiver.
2
Attach the PND to this receiver.