Installation manual

Others
101
XIX
Others
Connecting portable audio
players to the AUX jack
Use a commonly available accessory cord with
the RCA connector to connect a portable audio
player to the AUX (auxiliary) jack of this system.
For details, refer to "Switching Audio
Modes" on page 17.
ATTENTION
• While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility
by turning off system power or switching
from AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level of the connected player is
known.
• Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and confirm problem-free
operation in the vehicle before proceeding.
Switching the input system
When using an optional AUX cord (AUX105), the
main unit can be switched between RCA input
and input from the optional AUX cord (AUX105).
The system will switch between RCA
input and the optional AUX cord each
time the button is pressed.
RCA input (Input)
 Optional AUX
cord (Sub input)
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be
changed.
The Menu Selection mode is
activated.
The function mode is activated.
The AUX sensitivity mode is
activated.
1
Turn on the portable audio player
and start its play function.
2
Switch to AUX mode.
1
Press the [MODE] button for more
than one second.
1
Press the [CUSTOM] button for
more than two seconds.
2
Press the [SELECT] (Upper/Lower)
to select FUNC then press the
[ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the AUX
Sensitivity.
4
Press the [ENTER] button.
XVIII